The Commercial V4 e-LOOP Wireless Vehicle Detector Kit is a reliable alternative to traditional wired inductive loops, providing accurate vehicle detection without the need for cutting concrete, trenching or installing underground detection cables.
Designed for commercial, industrial and vehicle access control applications, the e-LOOP uses radar and magnetometer technology to detect vehicles and wirelessly communicate with the included e-TRANS 50 V4 receiver. The system is ideal for automatic gates, boom gates, barrier arms, car parks and vehicle entrances.
The Commercial e-LOOP features three selectable operating modes: Exit, Presence and Parking, allowing the system to be configured to suit different access control applications.
Key Features
- Wireless vehicle detection – no underground loop wiring required
- Surface-mounted installation
- Commercial-grade vehicle detection
- Exit, Presence and Parking modes
- Radar and magnetometer detection technology
- 433.39 MHz wireless communication
- 128-bit AES encrypted communication
- IP68-rated e-LOOP enclosure
- Operating temperature: -40°C to 80°C
- Radar detection range up to 2 m
- Magnetometer detection range up to 1.5 m
- Battery Life 10 years, Battery capacity 10800 mA
- Battery AA3.6V Lithium ER14505 x 4 , Static load capacity 12T
- e-CONNECT app compatible for configuration and diagnostics
- e-TRANS 50 V4 supports up to 4 e-LOOP sensors
Selectable Detection Modes
Exit Mode
Sends a single pulse trigger to the receiver when a vehicle is detected, making it suitable for automatic gate exit applications.
Presence Mode
Keeps the relay latched while a vehicle remains within the detection area, helping keep a gate or barrier open while the vehicle is present.
Parking Mode
Provides similar functionality to Presence Mode with slower latching and lower power consumption.
The operating mode can be changed directly on the e-LOOP or through the e-CONNECT mobile app.
e-TRANS 50 V4 Receiver
The included e-TRANS 50 V4 provides the wireless connection between the e-LOOP sensor and your gate or access control equipment.
e-TRANS 50 V4 specifications:
- Input voltage: 10–36V DC
- Frequency: 433.39 MHz
- Standby current: 4.5 mA
- Active current: 30 mA
- Relay contact rating: 1A
- Relay modes: Pulse, Latch and Hold
- Storage capacity for up to 50 remotes
- Supports up to 4 e-LOOP sensors
- Supports up to 4 keypads
- Supports up to 4 entry buttons
The V4 e-TRANS 50 also provides backwards compatibility with Version 3 and Version 4 e-LOOP systems, making it suitable for upgrading or expanding existing e-LOOP installations.
e-LOOP Specifications
- Model: Commercial e-LOOP EL00C
- Detection Technology: Radar + magnetometer
- Operating Frequency: 433.39 MHz
- Wireless Security: 128-bit AES encryption
- Radar Detection Range: 0.2–2 m
- Magnetometer Range: Up to 1.5 m
- Dimensions: 224 × 224 × 36 mm
- Weight: 1 kg
- Ingress Protection: IP68
- Operating Temperature: -40°C to 80°C
- Installation: Above-ground surface mount
Installation
The e-LOOP is installed directly onto a clean, level and secure surface using the supplied fasteners, eliminating the need for traditional saw-cut induction loops. The sensor should be positioned centrally along the vehicle's normal path and installed with the arrow facing towards the gate.
Kit Includes
- 1 × Commercial V4 e-LOOP Vehicle Detector
- 1 × e-TRANS 50 V4 Single-Channel Transceiver
- 1 × Coding Magnet
- Mounting Fasteners
- Installation Accessories
Applications: Automatic Sliding Gates • Swing Gates • Boom Gates • Barrier Arms • Car Parks • Commercial Entrances • Industrial Access Control
Note: Presence Mode is designed for vehicle detection only and must not be used as a personal safety function for pedestrians.
